ISE SMART CONNECT KNX PROGRAMMABLE
From electricity meter to heating: With the ISE SMART CONNECT KNX PROGRAMMABLE, third-party devices can be connected to the KNX bus in an simple and reliable way. This enables individualised connection logic to be developed in just a few days. The barrier to the world of building automation has never been this low.
For communication with the third-party system, the IP and USB interfaces can be used. The Programmable is the first successful affordable alternative to costly device development. Not only is the low price of the device itself impressive, but its further development is affordable as well. Either C# or VB.Net can be used to implement the application. This means that widely used and free programming tools can readily be used.
A pleasant evening at the push of a button
Just a push of a button is all it will take to dim the lights or start the multimedia system in future. This adapter enables more devices than ever before to be integrated into the KNX system.

Integrate third party systems
Using IP and USB adapters (FTDI), such as Modbus, 1Wire, RS232, RS485, HDMI (CEC), IR, CAN and other adapters, third-party systems can be readily integrated.

+ POINTS
+ Simple integration of third-party systems into KNX
+ Ready-certified KNX device
+ Connect third-party systems via IP or USB
+ Execution of .NET application (C# or VB.Net)
+ Comprehensive SDK
+ Protection of own application against unintentional duplication

Features
|
|
*The KNX certification for the ISE SMART CONNECT KNX PROGRAMMABLE is limited to the interworking ability with KNX products from other manufacturers.
Solution partners
ise solution partners develop custom-tailored and individual solutions based on the ise smart connect KNX Programmable.
Smart Solutions Müller GmbH
Hindenburgdamm 68
12203 Berlin
Phone: +49 30 40203090 - 0
Fax: +49 30 40203090 - 9

netyard AG
Schanzenstraße 40
40549 Düsseldorf
Phone: +49 211 415596 - 0
Fax: +49 211 415596 - 11

Technical data
Voltage: |
DC 24 V to 30 V |
Power consumption: |
2 W (Ethernet Version: 2x RJ45) 3 W (USB Version: RJ45 + USB with 300 mA) |
IP communication: |
Ethernet 10/100 BaseT |
KNX communication: |
KNX/TP, S-Mode |
KNX medium: |
TP1-256 |
Connections: |
2x RJ45 with integrated switch (Ethernet version) RJ45 + USB (USB version) Connection and branching terminals for KNX and 24 V |
Ambient temperature: |
0 °C to +45 °C |
Dimensions: |
2 TE (REG plus) |
Note:
- Power supply via external DC 24 V
- For ETS5 or higher
Ordering infoItem number 2x RJ45: 1-0005-006 |
![]() |
Item number 1x USB, 1x RJ45: 1-0004-005 |
![]() |
Downloads
-
Sources of supply
ise Individuelle Software und Elektronik GmbH
Osterstraße 15
D-26122 OldenburgPhone: +49 441 680 06 11
Fax: +49 441 680 06 15